|
|
| |
|
|
|
| |
KUKA Interpressor |
|
| The KUKA InterPressor is a complete system for press automation based on a 6-axis robot fitted with task-specific equipment. This complete package includes adapted electrical and pneumatic interfaces, adaptation of the KS PressTec system software and a fully integrated function package for component handling. The function package is available in 4 versions with vacuum ejectors, and optionally with gripper coding and auxiliary valves. All energy and fluids lines are pre-installed up to the customer-specific gripper interface. The system is optimized for press automation and can be used directly in the press line. |
|
Scope of supply
- Robot including controller
- Optimized controller interface for connection to press lines
- KS PressTec system software
- Function package in various versions for component handling
- Customer-specific tooling interface
Function package options
- Up to 4 vacuum ejectors with diagnostic function
- Up to 3 additional motions with monitoring
- Manual or automatic tooling coupling
- Tooling coding by means of pin or RFID
- Up to 2 integrated double-blank sensors
|
|
|
technical data |
Interpressor 80 |
Interpressor 100 |
Interpressor 120 |
Interpressor 130 |
|
max. payload with 800 mm tooling on axis 6 |
80 kg |
100 kg |
120 kg |
130 kg |
|
number of axes |
6 |
6 |
6 |
6 |
|
installation position |
Floor |
Floor / Ceiling |
|
Floor |
|
weight |
1.445 kg |
1.465 kg |
1.465 kg |
2.050 kg |
|
Installed motor power |
21,6 kW |
21,2 kW |
21,2 kW |
41,0 kW |
|
Connected load |
13,5 kW |
13,5 kW |
13,5 kW |
19,5 kW |
|
Transfer principle |
rotational |
|
|
|
|
Min. distance between presses |
4.200 mm |
4.200 mm |
4.200 mm |
4.200 mm |
|
Max. distance between presses |
6.000 mm |
8.500 mm |
8.500 mm |
8.500 mm |
|
Reach (intersection point, axis 5) |
3.100 mm |
3.500 mm |
3.500 mm |
3.500 mm | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| |
|
| |
© Copyright 2012 KUKA Systems GmbH All rights reserved |